Nazdar NB80 UV Adhesion Promoter
Inventory displays are updated daily and may not reflect current inventory at time of order
- Description
- Benefits & Specifications
- Resources
NB80 is an adhesion promoter that may be added to certain Nazdar inks to improve adhesion to plastics and some coated metals. To achieve optimum adhesion results on polyolefins, i.e. corrugated polypropylene; it is recommended that the surface tension test above 44 dynes/cm.
COMPATIBLE INKS:
- Plastic Plus
- 8400
- 9600
- 9700
- All Nazdar UV curable inks
NB80 is an adhesion promoter that may be added to certain Nazdar inks to improve adhesion to plastics and some coated metals. To achieve optimum adhesion results on polyolefins, i.e. corrugated polypropylene; it is recommended that the surface tension test above 44 dynes/cm.
COMPATIBLE INKS:
- Plastic Plus
- 8400
- 9600
- 9700
- All Nazdar UV curable inks
Disclaimer: Adhesion should always be tested as adhesion depends upon curing conditions, age and manufacturer of the substrate. Adhesion may be improved when the substrate is cleaned with a suitable solvent such as isopropanol.
When using any Nazdar additive, it is imperative to test the suitability of the product before making a full production run.