Nazdar Care106 UV Catalyst/Charger
Inventory displays are updated daily and may not reflect current inventory at time of order
- Description
- Resources
UV catalyst for use with Nazdar 2300 and 4300 series ink.
Use CARE106 UV Catalyst / Charger to increase water resistance and adhesion. Add up to 10% by weight. Improved adhesion and water resistance will show within 24 hours. Ink mixed with CARE106 has an 8-12 hour pot life with performance properties slowly declining with time.
UV catalyst for use with Nazdar 2300 and 4300 series ink.
Use CARE106 UV Catalyst / Charger to increase water resistance and adhesion. Add up to 10% by weight. Improved adhesion and water resistance will show within 24 hours. Ink mixed with CARE106 has an 8-12 hour pot life with performance properties slowly declining with time.
Disclaimer: Adhesion should always be tested as adhesion depends upon curing conditions, age and manufacturer of the substrate. Adhesion may be improved when the substrate is cleaned with a suitable solvent such as isopropanol.
When using any Nazdar additive, it is imperative to test the suitability of the product before making a full production run.