RhinoTech RhinoBond Aerosol Adhesive Activator

RhinoTech RhinoBond Aerosol Adhesive Activator
RhinoTech
Item#
RBP1500A10
RhinoBond RBP1500A Activator
$14.30
Login to check inventory

Minimum quantity required.

Inventory displays are updated daily and may not reflect current inventory at time of order
mail Send To Email

RhinoBond RBP1500A Activator

RBP 1500A Aerosol Adhesive Activator is used in conjunction with RhinoBond Adhesives. When using RhinoBond adhesives, this solvent based activator is used to cure the adhesive on wood or metal frames within 5-10 seconds. Without an activator, the RhinoBond adhesive will not cure properly. As a result, the screen mesh may release over time.

FEATURES:

  • Instantly cures cyanoacrylate adhesive
  • Fine atomization and consistent coverage promote more even curing
  • The can will not spill or leak like pump type activators

DIRECTIONS:

  1. Apply RhinoBond adhesive per instructions
  2. Lightly mist RBP 1500A onto the adhesive
  3. Be careful not to spray too much activator. This will cause the adhesive to ”boil,” therefore reducing the bond strength
  4. The adhesive should be cured or hardened after 10 seconds
  5. reapply with a light mist to cure any uncured adhesive
  6. Once adhesive is cured, cut mesh and remove the frame.
Write Your Own Review
You're reviewing: RhinoTech RhinoBond Aerosol Adhesive Activator
Your Rating:
loader
Loading...

You submitted your review for moderation.

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

Loading...