International Coatings All-Pro 900 Direct Print Nylon Plastisol Inks
Inventory displays are updated daily and may not reflect current inventory at time of order
- Description
- Benefits & Specifications
- Resources
All-Pro™ 900 Series Plastisol Ink is a fast flashing, 2 part ink, specifically formulated for printing on normally hard to print Nylon. Being the industry standard for over 15 years, the ink’s harder finish resists scratching, scuffing and peeling for an extremely durable image. It can also be used without catalyst on nonwoven polyporpylene bags (NPB) by adding up to 6% 3804 Low Cure Additive, which reduces cure temperatures down to 250°F (135ºC).
SPECIFICATIONS:
- Mesh: 125-230 t/in (49-90 t/cm) monofilament
- Emulsion: Any direct or indirect lacquer proof emulsion
- Squeegee: 70-80 Durometer, Sharp edge
- Cure Temp: 300°F to 325°F (149°C to 163°C) entire ink film
All-Pro™ 900 Series Plastisol Ink is a fast flashing, 2 part ink, specifically formulated for printing on normally hard to print Nylon. Being the industry standard for over 15 years, the ink’s harder finish resists scratching, scuffing and peeling for an extremely durable image. It can also be used without catalyst on nonwoven polyporpylene bags (NPB) by adding up to 6% 3804 Low Cure Additive, which reduces cure temperatures down to 250°F (135ºC).
SPECIFICATIONS:
- Mesh: 125-230 t/in (49-90 t/cm) monofilament
- Emulsion: Any direct or indirect lacquer proof emulsion
- Squeegee: 70-80 Durometer, Sharp edge
- Cure Temp: 300°F to 325°F (149°C to 163°C) entire ink film