International Coatings Plastisol Additives - 3804 Low Cure Additive



SDS (Safety Data Sheet)

3804 Low Cure Additive was developed in response to growing customer demand for a product that enables them to print on heat sensitive substrates, such as 100% polyester or the very popular non-woven polypropylene bags.


  • Lowers the curing or fusion temperatures of most plastisol based inks to less than 300°F (149 C)
  • Used when printing onto temperature sensitive fabrics such as 100% polyester or non-woven polypropylene bags
  • For use on 100% cotton, poly/cotton blends and 100% polyester
  • Will lower the flash times for most plastisol based inks


  • Mesh: Screen mesh to be determined by ink used with additive.
  • Emulsion: Any direct or indirect lacquer resistant emulsion.
  • Squeegee: 65-70 Single Durometer, or 60-90-60 or 70-90-70 Triple Durometer, Sharp edge
  • Cure Temp: 300F (149°C) or lower. Lower cure or fusion temperatures may be achieved when this additive is used with certain plastisol inks (down to 275°F [135°C]).

Ratings & Reviews

Product Disclaimer

Item numbers available:

IC3804PF04, IC3804PF05

Customer Reviews

This product has no reviews.
Customers Also Viewed
Eco-Sol MAX Digital Ink - 220ml Cartridges

Roland DG OEM EcoSol Max Inks - 220ml Cartridges


Roland DG VersaEXPRESS RF-640

Estelan 700 Blue Two-Part Screen Lacquer

Kiwo Estelan 700 Blue Two-Part Screen Lacquer

KiwoDur RD Frame Adhesive Hardener

KIWO KiwoDur RD Frame Adhesive Hardener