SEF America FlexTape Plus Transfer Tape with Liner

FEATURES:

• The polyester (PET) FlexTape Plus and adhesive withstands heat pressing cycles as long as 60 seconds up to 400°F (166°C). Testing required when exceeding 400F.
• Protects the surface of printed heat transfer during the heat pressing process as well as during storage and transportation of the graphic.
• Keeps multi-component graphics together during the transfer and pressing process.
• Because of the sticky adhesive, FlexTape Plus minimizes the risk of the graphic moving after positioning on the textile before and during the heat pressing process.
• The exceptional clarity aids in alignment of graphics when doing multi heat transfer overlays.
• FlexTape Plus removes easily without any adhesive residue after the heat pressing process. Always refer to the printable film manufacturer’s recommendation for FlexTape’s removal, i.e. Hot, Warm or Cold Peel.
• Note: FlexTape Plus transfer tapes work well with ALL brands and types of printable heat activated media, not just polyurethane films. Test prior to full production.
• Shelf Life: FlexTape Plus has extended shelf-life when stored, up to and may exceed 2 years, in temperatures at or below 80F and not exposed to direct sun for extended periods of time