Enthone 50-Series Cat-L-Inks Catalyst - Adhesion Promoter

Container:


Quantity:



SDS (Safety Data Sheet)



Adhesion promoting catalyst. Cures at room temperature in 5-7 days. Provides similar characteristics as Catalyst 45. maximum adhesion is achieved by heat cure @ 65.6-93.3º C (150-200º F).

* Cure: R.T. or Heat

* Average Pot Life: 1 hour

Ratings & Reviews

Product Disclaimer

MIXING INSTRUCTIONS:

Measure ink and catalyst at the proper mix ratio (refer to Color Numbers and Mix Ratios Section of the Technical Data Sheet). Both the ink and catalyst should be weighed accurately. Excessive and insufficient amounts of catalyst are detrimental to cured ink film properties. Mix thoroughly without introducing excessive amounts of air. Avoid the use of paper or wax coated cups. Stir from bottom of the container.

Item numbers available:

HYS77CAT02, HYS77CAT4Z

Customer Reviews

This product has no reviews.
Customers Also Viewed
Renegade Flatbed Graphic Press

M&R Renegade Flatbed Graphic Press

Sportsman EX Automatic Textile Press

M&R Sportsman EX Automatic Textile Press

RF-640 VersaEXPRESS

Roland RF-640 VersaEXPRESS

Estelan 700 Blue Two-Part Screen Lacquer

Kiwo Estelan 700 Blue Two-Part Screen Lacquer

KiwoDur RD Frame Adhesive Hardener

KIWO KiwoDur RD Frame Adhesive Hardener