International Coatings HDB Digital System - Synthesis Receiver Base Part B

Nazdar has recently been informed by International Coatings Company of serious shortages as a result of the supply chain disruptions the industry is facing. International Coatings has been working diligently on their ability to meet demand and has a dedicated team of procurement, supply chain and logistics professionals focused on these challenges.

Due to the current situation Nazdar may limit the orders of International Coatings Ink products starting October 1st, 2021. Additionally, the International Coatings product offering will be temporarily limited at times based on availability and demand.

If you have received International Coatings product in 2021 you may place your order through the “Reorder / Product History” tab from My Account.

The HDB Digital System™ is a 3 part/step easy to print system to be used in conjunction with direct-to-garment digital inks. An HDB primer coat is printed first (for both cotton and low bleed fabrics). HDB Synthesis Receiver Base™ (Part A and B) is then printed, followed by the HDB Optimum Clear™.

Synthesis Receiver Base™ is a two-component (Parts A & B) system that must be mixed together before printing can begin. (See important information under "Benefits & Specifications"). The HDB Digital System™ is designed for dark and light colored garments. Dark garments require application of the primer; light garments do not require the primer coat.

Works with Synthesis Receiver Base Part A. Click Here to order online.


Synthesis Receiver Base™ Part A and B must be mechanically mixed for 5 minutes, making sure that the mixture temperature stays below 95ºF (35ºC) during the mixing process. After mixing, the combined parts must sit for a minimum of 15 minutes before use.

Once mixed, the ink should be covered in the container when not in use. Mixed ink has a working life of 5 days, if stored properly in a closed container. Storage areas should be kept at no higher than 80ºF (27ºC). Mixing ratio of Part A to Part B is as follows: 89 grams of Part A to 11 grams of Part B. Mix only the amount needed for the print run. Remember to mechanically mix the two parts together and let the mixed ink sit for at least 15 minutes before use.

Ratings & Reviews

Product Disclaimer

Customer Reviews

This product has no reviews.
Customers Also Viewed
MagnaPrint Hybrid Fusion White

MagnaColours MagnaPrint Hybrid Fusion White

290 Series UV Inkjet

Nazdar 290 Series UV Inkjet

Eco-Sol MAX Digital Ink- 440ml Cartridges

Roland DG OEM EcoSol Max Inks - 440ml Cartridges


Roland DG VersaEXPRESS RF-640

291 Series UV Inkjet Ink

Nazdar 291 Series UV Inkjet Ink