MagnaColours MagnaPrint Discharge LO - White

APPLICATIONS:

• Mix base with MagnaPrint Eco Pigment and add 6% Activator AB. Mix and leave for 10-30 minutes to dissolve. Remix prior to printing. Activated inks have a shelf life of up to 8 hours depending on the room temperature.
• Print using 43 – 77 (110 - 200) mesh screens and a medium 65° shore rectangular squeegee. Avoid the use of flash units, for best results discharge prints should be printed wet on wet.
• Use 3 - 4mm off contact and one stroke print. The discharge paste must penetrate into fabric. If necessary, reduce squeegee speed and increase pressure.
• Always print MagnaPrint Discharge Super White LO in the last position to avoid pick off and build up on screens.
• After printing the garment/panel should be dried and baked, ideally for 2½ - 3 min at 170°C (340°F).