CCI Microwash II Ink Degradent / Emulsion Remover

Container:


Quantity:



SDS (Safety Data Sheet)



MicroWash II is a water soluble ink degradent and emulsion remover. It is formulated to work on UV & plastisol inks. MicroWash II will remove all photopolymer, diazo, and capillary film emulsions. This product is safe on all mesh types.

MANUAL USE INSTRUCTIONS:

  1. Card excess ink from screen, apply Microwash II to the screen(both sides).
  2. Scrub screen with nonabrasive pad or brush.
  3. High pressure rinse - starting at bottom.

DIP TANK USE INSTRUCTIONS:

  • Dilute Microwash II 1:10 with water.
  1. Card excessive ink from screen.
  2. Place screen in Dip Tank for 3-5 minutes.
  3. Remove screen and high pressure rinse. Start at the bottom and work upwards - this will prevent any ink from locking back onto the mesh.

Product Disclaimer

Product should not be frozen.

Item numbers available:

MW204, MW205
Customers Also Viewed
Eco-Sol MAX Digital Ink 440ml

Roland DG OEM EcoSol Max Inks - 440ml Cartridges

Eco-Sol MAX Digital Ink 220ml

Roland DG OEM EcoSol Max Inks - 220ml Cartridges

Estelan 700 Blue Two-Part Screen Lacquer

Kiwo Estelan 700 Blue Two-Part Screen Lacquer

KiwoDur RD Frame Adhesive Hardener

KIWO KiwoDur RD Frame Adhesive Hardener