Home > News

FOG Software Group Acquires EFI Fiery DesignPro Business, Now Rebranded as Aquario Design

FOG Software Group Acquires EFI Fiery DesignPro Business, Now Rebranded as Aquario Design

Aquario Design, formerly EFI Fiery DesignPro and Generation Digital, a provider of textile and fashion software solutions built as plug-ins to Adobe® Creative Cloud, has been acquired by FOG Software Group (“FOG”), a division of Constellation Software, Inc., and will operate as a standalone business within FOG.
Thursday, May 07, 2020/Author: Holly Gray/Number of views (327)/Comments (0)/
Tags:
U.S. Department of Labor Publishes New Osha Poster Aimed at Reducing Workplace Exposure to the Coronavirus

U.S. Department of Labor Publishes New Osha Poster Aimed at Reducing Workplace Exposure to the Coronavirus

The U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) has issued a new poster listing steps all workplaces can take to reduce the risk of exposure to coronavirus.

Thursday, April 16, 2020/Author: Roxi Patriquin/Number of views (112)/Comments (0)/
Tags:
Avoiding OSHA and Injuries

Avoiding OSHA and Injuries

Even though working in a printing operation is a relatively safe environment, injuries can and do occur.
Thursday, March 05, 2020/Author: NazStore/Number of views (154)/Comments (0)/
Tags:
Nazdar Color Management Boot Camp

Nazdar Color Management Boot Camp

Shawnee, KS

Learn from SGIA certified instructors about color theory and principles, goals of color management, device calibration, time-tested procedures, newest print standards, spot colors, and print verification.
Thursday, February 20, 2020/Author: NazStore/Number of views (214)/Comments (0)/
Tags:
EFI appoints Jeff Jacobson as CEO

EFI appoints Jeff Jacobson as CEO

Electronics For Imaging, Inc. has announced the appointment of Jeff Jacobson, a 30-year veteran of the digital imaging and industrial technology sector, as Chief Executive Officer, effective immediately.
Thursday, September 19, 2019/Author: NazStore/Number of views (403)/Comments (0)/
Tags:
Is UV LED Right for Your Screen Shop?

Is UV LED Right for Your Screen Shop?

While UV LED curing in the digital printing space has grown significantly over the past decade, most screen-printing operations have continued to use traditional curing technology. The primary obstacle wasn’t the readiness of the technology, but the cost. Until recently, LEDs were expensive, and the need in a screen-printing line to cure the full width of the print at once meant that many more LEDs were required compared to a wide-format inkjet printer. This tended to limit early development in the screen-printing industry to containers and other smaller formats where equipment cost was less of a factor.


Tuesday, July 30, 2019/Author: Lindsay Merwald/Number of views (745)/Comments (0)/
Tags:
5 Secrets for Screen Making Success

5 Secrets for Screen Making Success

Proven advice for industrial applications and other situations where delivering less-than-flawless prints isn’t an option.


Thursday, November 29, 2018/Author: Lindsay Merwald/Number of views (12825)/Comments (0)/
Tags:
Nazdar partners with Focus Label to drive growth of UV LED

Nazdar partners with Focus Label to drive growth of UV LED

Nazdar Ink Technologies has partnered with Focus Label Machinery to help drive the growth of UV LED technology within the label converter market in the UK and EMEA.

The two businesses are now working closely together to demonstrate the efficiency of UV LED curing technology at Focus Label Machinery's Bingham, Nottinghamshire-based offices.

With a mutual interest in the technology, both companies share an objective to showcase how - alongside traditional products - UV LED curing technology is a commercially-viable option for the label and packaging producer.

Wednesday, November 14, 2018/Author: Lindsay Merwald/Number of views (1073)/Comments (0)/
Tags:
Nazdar Ink to showcase ink solutions at InPrint Milan 2018

Nazdar Ink to showcase ink solutions at InPrint Milan 2018

Nazdar Ink Technologies will once again be among the exhibitors at InPrint - the industrial print show - in Milan, Italy this November, showcasing its wide range of UV-LED, traditional UV, solvent and aqueous ink formulations to attendees.


Wednesday, October 10, 2018/Author: Lindsay Merwald/Number of views (921)/Comments (0)/
Tags:
Defining Industrial Print

Defining Industrial Print

The Mack Brooks Exhibition Group held its InPrint USA Industrial Inkjet Conference in Chicago, IL, May 1 to 2, 2018 at the Palmer House, a Hilton Hotel. The organization’s goal is to inform, inspire, and educate. Co-founders Frazer Chesterman and Marcus Timson led the event with opening remarks that addressed the growing popularity of inkjet printing in manufacturing and the need to educate potential users on its capabilities.


Thursday, May 31, 2018/Author: Lindsay Merwald/Number of views (1050)/Comments (0)/
Tags:
12345678910 Last