Viper Sidewinder Ink Management System


Viper Sidewinder

Ink maintenance in DTG and DTF printing is paramount to being successful. Failure to maintain your white ink prior to printing can result in poor prints, clogged print heads, and lots of frustration and wasted money.

The Viper SIDEWINDER is purposely built to help keep your white ink managed and always ready to put into your printer. With cycle times of 10 or 30 minutes on/off (or with a 1 hour pause/idle setting) you can constantly keep your ink in suspension 24/7 - attendant free. And it does this by gently rolling the ink and not introducing air bubbles into the ink which is common with vigorous hand shaking to mix the inks.

Designed to roll single liter bottles, 10L or 20L cubes, or even GTX Ink Boxes, if we don't have a jig that will hold your container we can make it for you from a provided sample.

Stop wasting time. Keep your ink and printers happy with the Viper SIDEWINDER!

Features:

  • The Viper Sidewinder allows you to change the speed of the rollers to suit your fluid mixing needs.
  • The user cycle the rollers to turn on-off-on in 5 minute or 10 minute intervals.
  • The Sidewinder can also be set to run continuously by turning off the stop cycle.
  • Two additional Sidewinder units can be attached via Ethernet Cable (Cat 5 or 6, not supplied) to power up to 2 additional units (no extra power supply needed).

Product Disclaimer

Customers Also Viewed
SureColor F3070 Max Industrial Direct-to-Garment Printer

Epson SureColor F3070 Max Industrial Direct-to-Garment Printer

Eco-Sol MAX Digital Ink 440ml

Roland DG OEM EcoSol Max Inks - 440ml Cartridges

KiwoDur 1100 PowerGrip Adhesive Hardener

Kiwo KiwoDur 1100 PowerGrip Adhesive Hardener

TexiTrans CP100 Cold Peel Digital Textile Transfer Paper

One Step Papers TexiTrans CP100 Cold Peel Digital Textile Transfer Paper

KiwoDur RD Frame Adhesive Hardener

KIWO KiwoDur RD Frame Adhesive Hardener